Advanced search
86 search results
Page 4 out of 9 Pages
- Trouble Shooting: Why thinclients are not booting/coming up? Answer: Symptom: Netbooted thinclients are not booting up at all. Probable Cause: The netboot capability depends on a number of services. Chances are that one of these services has ...
- Installation: What are the network requirements for installation of Colama™ Univ. Edition server ? Answer: Network requirements An isolated class C network. Switched (100Mbps or faster) networking for the lab. An identified gateway. An identified DNS server. ...
- Workspace Management: How does one track the status of pending jobs? Answer: Navigate to Workspace->Jobs->My Pending Jobs. A listing of all "pending jobs" still in the queue, along with a list of past jobs that failed is displayed. Note ...
- Networking: Why is the colama-server awfully slow? Answer: Symptom: All/any requests to the colama-server take inordinately long to get a response. Probable Cause: most likely scenarios is that dnsmasq on the colama-server has been configured with ...
- Machine management: How does one enable the spice client for a machine? Answer: Configure a machine to use the spice protocol by Navigate to Workspace->Deployments->Machines->My Select the machine you wish to configure, and click on Ops->Edit Config Edit the contents to ...
- Installation: Why does license become invalid after hardware upgrade? Answer: On installation, Colama configures system according to underlying hardware. Some of the configuration done are - registering MAC address in 70-persistent-net.rules, generating node-id constructed ...
- Machine management: Why do machines not show the correct time? Answer: Symptom: Machines show arbitrary system times, often days or weeks in the past. Probable Causes: The are a few common causes for this problem ... Machines synchronise their system ...
- Machine management: How to configure a Windows machine to read the hardware clock as local time Answer: For Windows XP and Windows Server 2003: Right-click My Computer, and then click Properties. -or- Click Start, click Run, type sysdm.cpl, and then click OK. On the Advanced tab, ...
- Machine management: How to select a boot option? Answer: From the OPS menu select "Edit Config" and change the boot device type.To boot from CD-ROM Select <boot dev='cdrom' /> To boot from HDD Select <boot dev='hd' ...
- Screen Display: How to install qxl driver in OpenSuse 12.1 Answer: To install the qxl driver on OpenSuse 12.1, follow these steps- Make sure you have these packages installed on system. If not, open Start menu | ...